E26 LED Pool Light Bulb

Power: 12W
Voltage: AC/DC 12-16V
Material: PC
CCT: Warm white/Natural white/Cool white/Red/Blue/Yellow….RGB
LED Chip: SMD 2835
LED Chip Quantity: 108PCS
LED Brand: Brideglux/ Sanan/Phillips…ect
Beam Angle: 120 degree
Socket: E26 or E27
Controller: Remote
IP Grade: IP68
Size: D77*H85MM
Warranty: 2 Years

GENERAL CHARACTERISTICS:
This PAR20 lamp has been designed to be used fully submerged underwater in fresh water swimming pools. It is Class III electric apparatus with very low voltage for safety (12V with alternating current).

This PAR20 lamp compiles with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a nominal immersion depth of 2m.

This PAR20 lamp compiles with international safety standards for lights.

CONCRETE SWIMMING POOL
To install a PAR20 lamp in a concrete swimming pool the housing should be fixed in the wall of the swimming pool, make sure that the cable outlet of the housing remains on the upper part.

ATTENTION:
Before any handling ensure that there is NO voltage supplied to the lamp.
The new lamp should have the same characteristics as that supplied with the PAR20
In order to ensure full waterlightness, clean the seat of the O-ring for the lamp or replace the O-ring if you observer any notches or permanent damage; If the external flexible or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacture or his service agent or a similar qualified person in order to avoid hazard.

Size: D77*H85MM